1) You must verify the power station you are plugging into is capable of taking this power load. Not doing this can damage your power station.
2) Check the connection status of every compenent of this kit. Do not use any portion of this kit if it becomes damaged.
3) Under normal conditions, the PV cells may be exposed to higher currents or voltages higher than test conditions. Therefore, when calculating the system connected to the panels, it is required to multiple the short-circuit current and open circuit voltage values marked by a factor of 1.25. Not doing this can damage your power station.
4) Use of these solar panels and kits are designed to use from -5°C to 85°C.
